Filter
Top Products
Symptom-to-FRU index 133
No beep symptoms
Diagnostic error codes
Note: In the following error codes, if
XXX
is
000
,
195
, or
197
do not replace a FRU. The description for these
error codes are:
000 The test passed.
195 The Esc key was pressed to abort the test.
197 This is a warning error and may not indi-
cate a hardware failure.
For all error codes, replace/follow the FRU/Action
indicated.
One Long and
Two Short
Beeps
1. Video adapter (if present)
2. System Board
Two Long and
Two Short
Beeps
1. Video adapter
No Beep
Symptom
FRU/Action
No beep and
the system
operates
correctly.
1. Check speaker cables
2. Speaker
3. System board
No Beeps
occur after
successfully
completing
POST
1. Check speaker connections
2. Speaker
3. System board
No ac power 1. Check the power cord.
2. Power supply.
No beep and
no video
1. See “Undetermined problems”
on page 147
Error
Code/Symptom
FRU/Action
001-XXX-000
(Failed core tests)
1. System Board
001-XXX-001
(Failed core tests)
1. System Board
Beep/Symptom FRU/Action