JAI CV-A50 Security Camera User Manual


 
CV-A50 / CV-A60
1. General
The difference from the previous manual is that the CCD sensor in CV-A50 is changed to new
types. Now the used CCD sensors are: ICX-408AL-6, 409AL-6, 418ALL-6, 419ALL-6.
The CV-A50/A60 is a range of monochrome CCIR and EIA interlaced 1/2” and 1/3” CCD cameras,
designed for automated application, featuring an extremely small housing and a wide range of
unique functions.
The asynchronous trigger can be set to work in several modes, to allow functions such as pulse
width controlled shutter, programmable shutter speed and long time integration.
All mode settings of the camera can be set up via an RS-232C interface, greatly reducing the
need for mechanical switches of jumpers.
The CV-A50 and CV-A60 output an analogue video signal, with composite sync.
The latest version of this manual can be downloaded from: www.jai.com
The latest version of Camera Control Tool for CV-A50/60 can be downloaded from: www.jai.com
2. Standard Composition
The standard camera composition consists of the camera main body.
3. Main Features
New compact size 1/2” and 1/3” monochrome CCD cameras
752 (h) x 582 (v) pixels for CCIR, 768 (h) x 494 (v) for EIA
Improved sensitivity, dynamic range and smear performance
High S/N ratio > 60dB
Extended range of functions and options compared to CV-M50
Interlaced or non-interlaced scanning. Field or frame accumulation.
Internal, external HD/VD or random synchronization
Edge pre-select, pulse width and start/stop trigger modes
Long time exposure with external VD pulse
Frame delay readout mode
Exposure enable EEN, write enable WEN and pixel clock out
No mechanical switches or jumpers for mode setting
Short ASCII commands for modes setting via serial port
Shutter speed down to 1/10,000 in 8 steps
Windows 98/NT/ME/2000 setup software
- 2 -