JVC GC-XA2 Camcorder User Manual


  Open as PDF
of 57
 
11
Getting to Know Your Camera
1
Load the battery.
~ Slide the port/slot cover latch in the
direction indicated.
Ÿ Slide and open the cover in the
direction indicated while holding
down the latch.
! Insert the battery in the correct
direction (+/–) while pulling the blue
lever to the left.
2 Charge the battery.
~ Connect the USB cable.
Ÿ Press < or > to select “Adapter”, and
press SET.
• TheAccessLEDlightsduringcharging.
• Theapproximatechargingtimesare5
hours(whenconnectedtoaPC)and
2.3hours(whenconnectedtotheAC
adapter).
• DonotusebatteriesorACadapters
made by other manufacturers.
TheAccessLEDturnsoffwhenchargingis
complete.RemovetheUSBcableandclosethe
coverfirmly.
Ÿ
AccessLED
~
Charging the Battery
1
2
 previous next