JVC GC-XA2 Camcorder User Manual


  Open as PDF
of 57
 
12
Getting to Know Your Camera
• InsertaseparatelypurchasedSDcardintothe
SDslotfirmly,untilthecardislocked.
• ToremovetheSDcard,pushthecardinonce,
and pull it out straight.
• WhenusinganewSDcard,formatthecardin
the menu screen.
Operationisconfirmedwiththefollowingmanufacturers’SDcards.
Class4orhigherSD/SDHC/SDXCcards(upto128GB)
Whenrecordingwith1080p60(1080p50),Class6orhigherisrequired.
-SanDisk -TOSHIBA
1 Press and hold Power for 2 seconds to
turn the power on.
The clock setting screen appears the first
time the camera is used.
2 Press < or > to adjust the year, and press
SET.
3 Repeat the previous step to adjust the
month, day, hour, and minute.
Inserting an SD Card
Setting the Clock
Youcanre-adjusttheclockfromthemenuscreen.
1 Press MENU.
2 Press < or > to select “Setup”, and press SET.
3 Press < or > to select “More”, and press SET.
4 Press < or > to select “Time Setting”, and press SET.
5 Press < or > to adjust the year, and press SET.
6 Repeat the previous step to adjust the month, day, hour, and minute.
 previous next