JVC GC-XA2 Camcorder User Manual


  Open as PDF
of 57
 
54
Troubleshooting
Troubleshooting
Ifthecamerafailstofunctionasexpected,followtheproceduresbelow.
1 Check the troubleshooting below.
2 The camera may not work properly due to the noise or static electricity, etc. In this
case, remove the battery and reset the camera.
3 If the System does not work correctly after these procedures, consult your nearest JVC
dealer.
Problem Check
Cannotturnonthecamera/
Thepowerturnsoff
suddenly
Recharge the battery pack.
CannotconnecttotheWi-
Fi/Wi-Ficonnectioncutsoff
Trytoconnectagaininabetterreceptionenvironment.
Ifyouarefarfromthereceiver,thereisinterference,orif
thereisamicrowaveoranotherwirelessdevicenearby,the
communicationspeedmayslowdownortheconnectionmay
not be established.
Recording stopped
automatically
• Turnofftheunit,waitforawhile,andturnitonagain.The
unitstopsautomaticallytoprotectthecircuitwhenthe
temperature rises.
• CheckthatthereisenoughspaceintheSDcard.
The photo is out of focus or
dark
• Thelightisinsufficient.Takephotosinbetterlighting.
• Thecameraextendsphotoexposuretimeunderlowlight/
indoorconditions.Keepthecamera(andthetargetsubject)
steadyforseveralsecondswhentakingphotos.
• Placethecameraonaflatandsteadysurface,oruseatripod.
Thecolorofthevideo/photo
is not natural
Thewhitebalancemaynotbeadjustedautomaticallydepending
onthelightconditions.Selecttheproperwhitebalanceoption
to match the light source.
The thermometer icon
appears
Theinsideofthecamerahasbecomeoverheated.Turnoffthe
unitandwaitforawhileuntilthecameracoolsdown.
Troubleshooting
 previous next