EN
ENEN
EN
Master Page: Left-Heading0
VIDEO PLAYBACK
1
Load a cassette. (੬ pg. 15)
2
Set the VIDEO/MEMORY Switch to “VIDEO”.
3
Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
4
To start playback, press PLAY (4/9).
5
To stop playback, press STOP (8).
● During Stop mode, press REW (3) to
rewind, or FF (5) to fast-forward the tape.
NOTES:
● Clean the video heads using an optional dry
cleaning cassette when:
• No picture during playback.
• Blocks of noise appear during playback.
For details, ੬ pg. 75.
● If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.
● The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
(੬ pg. 22)
● You can also view the playback picture on the
LCD monitor with it flipped over and pushed
against the camcorder body.
● LCD monitor/viewfinder indications:
• When power is supplied from a battery: the
“” battery indicator is displayed. (੬ pg. 84)
• When power is supplied from an AC outlet: the
“” battery indicator does not appear.
● When a cable is connected to the S/AV connector,
the sound is not heard from the speaker.
To control the speaker volume…
Slide the Power Zoom Lever (VOL.) towards “+” to
turn up the volume, or towards “–” to turn down the
volume.
Still Playback
Pauses during video playback.
1) Press PLAY (4/9) during playback.
2) To resume normal playback, press PLAY (4/9)
again.
● If still playback continues for more than about
3 minutes, the camcorder’s Stop mode is
automatically engaged.
● When PLAY (4/9) is pressed, the image may
not pause immediately while the camcorder
stabilizes the still image.
Normal Playback
Speaker
Play/Pause Button
(PLAY (4/9))
Lock Button
Rewind Button (REW (3))
VIDEO/MEMORY
Switch
Power Switch
Stop Button (STOP (8))
Power Zoom Lever (VOL.)
Fast-Forward
Button (FF (5))
SELECT/SET Button
MENU Button
+/- Button
GR-D200US.book Page 20 Friday, April 11, 2003 1:05 PM