Filter
Top Products
"&
"&"&
"&
EN
ENEN
EN
Master Page: Left
The Navigation Function helps you check tape
contents by making thumbnail images on a memory
card.
To make thumbnail images during video
recording automatically
1
Load a cassette. (੬ pg. 15)
2
Load a memory card. (੬ pg. 16)
3
Set the VIDEO/MEMORY Switch to “VIDEO”.
4
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
5
Set “NAVIGATION” to the desired navigation
storing time. (੬ pg. 31, 35)
● If the “” indicator appears blinking on the
screen, wait until it stops blinking. If it does not
stop blinking after a while, check if a memory
card is loaded.
6
Press the Recording Start/Stop Button to start
recording.
● When the recording time
is over the navigation
time set in step 5, “”
appears briefly, then the
image of the point where
recording is started is
captured and stored in
the memory card as a
thumbnail image.
● If the Recording Start/
Stop button is pressed
before “” stops
blinking, the image of the
point where the loaded memory card is
recognised is captured.
7
Press the Recording Start/Stop Button to stop
recording.
To make thumbnail images after video recording
manually...
1) Perform steps 1 to 4 above.
2) Set “NAVIGATION” to “MANUAL”.
(੬ pg. 31, 35)
3) After the recording, press NAVI STORE.
•The “” indicator appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
NOTES:
● The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If “REC SELECT” is set to “ / ”
in DSC Menu, the number shows how many
640 x 480 pixel images can be stored.
● If “5S” is set to “5S” or “Anim.” in MANUAL
Menu, the NAVIGATION function will not work
properly.
To find scenes on tape using thumbnail images
(NAVIGATION Search)
1 Load a cassette. (੬ pg. 15)
2
Load a memory card. (੬ pg. 16)
3
Set the VIDEO/MEMORY switch to “VIDEO”.
4
Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
5
Press NAVI during video playback or stop mode.
● The loaded cassette’s
NAVIGATION thumbnail
image screen appears.
● Press REW (3) to
display the previous
page. Press FF (5) to
display the next page.
6
Press + or – to select the desired image, and press
SELECT/SET.
NAVIGATION Function
Power Switch
VIDEO/MEMORY
Switch
Lock Button
NAVI STORE Button
NAVI Button
Fast-Forward Button
(FF (5))
Rewind Button (REW (3))
SELECT/SET Button
+/- Button
PAUSE
PAUSE
PAUSE
1h m1
hm
100
Displayed while the
captured image is
being stored in the
memory card.
TC : 13:23:15
3 224YDATE : AM :’ 30:329AM
ONITNAVIGA
1 2 3
4 5 006
FEATURES FOR RECORDING (cont.)
GR-D200US.book Page 48 Friday, April 11, 2003 1:05 PM