Filter
Top Products
EN
13
TAPE RECORDING
Power Switch Position
:
Allows you to set various recording functions using the
Menus. If you want more creative capabilities than Full
Auto recording, try this mode.
(Full Auto):
Allows you to record using NO special effects or manual
adjustments. Suitable for standard recording.
OFF (CHARGE):
Allows you to switch off the camcorder.
PLAY:
• Allows you to play back a recording on the tape.
• Allows you to access data stored on the memory card
or to transfer a still image stored on the memory card
to a computer.
VIDEO/DSC Switch Position
VIDEO:
• Allows you to record on a tape or play back a tape.
If “REC SELECT” is set to “
/ ” in the DSC
Menu Screen, still images are recorded on the
memory card as well.
• Zoom magnification over 16X is available (
੬ pg. 13,
28).
DSC:
Allows you to record on a memory card or access data
stored on a memory card.
Journalistic Shooting
In some situations, different shooting angles may
provide more dramatic results. Hold the camcorder in
the desired position and tilt the LCD monitor in the
most convenient direction. It can rotate 270° (90°
downward, 180° upward).
Self-Recording
You can shoot yourself while viewing your own image
in the LCD monitor. Open the LCD monitor and tilt it
upward 180° so that it faces forward, then point the
lens toward yourself and start recording.
Operation Mode
Choose the appropriate operation mode according to
your preference using the Power Switch u and VIDEO/
DSC Switch 4.
Zooming
To produce the zoom in/out effect, or an instantaneous
change in image magnification.
Zoom In
Slide the Power Zoom Lever
& towards “T”.
Zoom Out
Slide the Power Zoom Lever
& towards “W”.
Ⅲ The further you slide the Power Zoom Lever &, the
quicker the zoom action.
NOTES:
● Focusing may become unstable during Zooming. In this
case, set the zoom while in Record-Standby, lock the
focus by using the manual focus (
੬ pg. 26), then zoom
in or out in Record mode.
● Zooming is possible to a maximum of 700X, or it can be
switched to 16X magnification using the optical zoom
(੬ pg. 28).
● Zoom magnification of over 16X is done through Digital
image processing, and is therefore called Digital Zoom.
● During Digital zoom, the quality of image may suffer.
● Digital zoom cannot be used when the VIDEO/DSC
Switch
4 is set to “DSC” (੬ “VIDEO/DSC Switch
Position”).
● Macro shooting (as close as approx. 5 cm (2") to the
subject) is possible when the Power Zoom Lever
& is set
all the way to “W”. Also see “TELE MACRO” in the Menu
Screen on page 29.
&
4
u
Power-Linked Operation
When the Power Switch u is set to “ ” or “ ”, you can
also turn on/off the camcorder by opening/closing the LCD
monitor or pulling out/pushing in the viewfinder.
1 GR-D91US EN 12-16 02.11.6, 5:47 PM13