Filter
Top Products
EN
23
Night-Alive
Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is
strobing due to the slow shutter speed.
1 Set the Power Switch u to “ ” while pressing down
the Lock Button y located on the switch. Open the
LCD monitor fully or pull out the viewfinder fully.
2 Press NIGHT 0 so that the Night-Alive indicator
“ ” * appears.
• The shutter speed is automatically adjusted to provide
up to 30 times sensitivity.
•“A” appears beside “ ” * while the shutter speed is
being automatically adjusted.
To Deactivate Night-Alive . . .
..... press NIGHT 0 again so that the Night-Alive
indicator disappears.
NOTES:
● During Night-Alive, the following functions or settings
cannot be activated and its indicator blinks or goes out:
• Some modes of “Program AE With Special Effects”
(
੬ pg. 23, 24).
• “GAIN UP” in the CAMERA Menu (
੬ pg. 29).
• “DIS” in the MANUAL Menu (
੬ pg. 29).
● During Night-Alive, it may be difficult to bring the
camcorder into focus. To prevent this, use of manual
focus and/or a tripod is recommended.
Program AE With Special Effects
1 Set the Power Switch u to “ ” while pressing down
the Lock Button y located on the switch. Open the
LCD monitor fully or pull out the viewfinder fully.
2 Press the MENU/VOLUME wheel % in. The Menu
Screen appears.
3 Rotate the MENU/VOLUME wheel % to select
“ PROGRAM AE”, then press it.
4 Rotate the MENU/VOLUME wheel % to select the
desired mode, then press it. Selection is complete.
Press the MENU/VOLUME wheel % in again. The
Menu Screen closes.
• The PROGRAM AE Menu disappears and the
selected mode is activated. The selected mode
indicator appears.
To Deactivate The Selected Mode . . .
..... select “OFF” in step 4.
IMPORTANT
Some modes of Program AE with special effects
cannot be used with certain Fade/Wipe Effects
(੬ pg. 24). If an unusable mode is selected, its
indicator blinks or goes out.
FOR RECORDING
NOTES:
● Program AE with special effects can be changed during
recording or during Record-Standby.
● Some modes of Program AE special effects cannot be
used during Night-Alive.
SHUTTER
1/60: The shutter speed is fixed at 1/60th of a second.
Black bands that usually appear when shooting a TV
screen become narrower.
1/100: The shutter speed is fixed at 1/100th of a
second. The flickering that occurs when shooting under
a fluorescent light or mercury-vapor lamp is reduced.
SPORTS
(Variable Shutter Speed: 1/250 – 1/4000)
This setting allows fast-moving
images to be captured one frame at
a time, for vivid, stable slow-motion
playback. The faster the shutter
speed, the darker the picture
becomes. Use the shutter function
under good lighting conditions.
SNOW
Compensates for subjects that may otherwise appear
too dark when shooting in extremely bright surround-
ings such as in the snow.
SPOTLIGHT
Compensates for subjects that may otherwise appear
too bright when shooting under extremely strong direct
lighting such as spotlights.
NOTE:
“SPOTLIGHT” has the same effect as –3 with the exposure
control (
੬ pg. 26).
TWILIGHT
Makes evening scenes look more natural.
White Balance (
੬
pg. 27) is initially set to , but can
be changed to your desired setting. When Twilight is
chosen, the camcorder automatically adjusts the focus
from approx. 10 m (32 ft) to infinity. From less than 10 m
(32 ft), adjust the focus manually.
SEPIA
Recorded scenes have a brownish tint like old photos.
Combine this with the Cinema mode for a classic look.
MONOTONE
Like black and white films, your footage is shot in B/W.
Used together with the Cinema mode, it enhances the
“classic film” effect.
CLASSIC FILM
Gives recorded scenes a strobe effect.
STROBE
Your recording looks like a series of consecutive
snapshots.
1 GR-D91US EN 23-34 02.11.6, 2:14 PM23