JVC GY-HD101 Camcorder User Manual


 
28
PREPARATIONS
Basic System
*1 An HZ-FM13 cannot be used with a Th16×5.5BRMU or S14×7.3B12/U zoom lens.
Use a FUJINON focus manual unit (FMM-8, CFH-3, CFC-12-990).
For details, please consult your JVC authorized dealer.
MACRO
SHOULDER BELT
EARPHONE
MICROPHONE
MV-P615U
MV-P618U
3P
FOCUS MANUAL UNIT
*1 HZ-FM13 (FUJINON)
HZ-FM15 (CANON)
1/3 ZOOM LENS
Th13 × 3.5BRMU (FUJINON)
Wide Converter
WCV-82SC
FOCUS MANUAL UNIT
*1
ZOOM SERVO UNIT
HZ-ZS13B
1/2 ZOOM LENS
S14 × 7.3B12U (FUJINON)
S17 × 6.6BRM (FUJINON)
S20 × 6.4B12U (FUJINON)
YH16 × 7K12U (CANON)
YH19 × 6.7K12U (CANON)
MICROPHONE
1/3 ZOOM LENS
Th16 × 5.5BRMU (FUJINON)
GY-HD100
STANDARD PACKAGE
Mount Converter
(1/2-1/3)
AMC-12
CARRYING CASE
GY-HD100
BATTERY
BN-V428
DC cable (2m)
AC ADAPTER
AC
TRIPOD
TP-P300
DOLLY
TP-P205
COMPONENT CABLE
RCA pin
COMPOSITE CABLE
RCA pin
AUDIO CABLE
Stereo-mini RCA pin
BATTERY
BN-V438
IEEE1394 CABLE
6P-6P
MONITOR
DV VTR
Non-linear Editing SYSTEM
BR-HD50
29
PREPARATIONS
Attaching the Zoom Lens (Provided)
1.Loosen the mount ring.
2.Attach the lens with its pin aligned with the hole in the
mount.
3.Tighten the mount ring.
4.Connect the cable connector.
5.Clamp the lens cable.
CAUTION
•Be sure to tighten the mount ring completely. Incomplete
tightening may result in the lens dropping off or disturbed
back focus.
•Set the GY-HD100’s power switch to “OFF” before the
zoom lens is attached or detached.
Attaching the Microphone (Provided)
Connect the provided microphone to the microphone holder.
Provided microphone is a phantom microphone.
1.Turn the knob on the microphone holder anticlockwise to
loosen it and open the microphone holder.
2.Place the microphone in the microphone holder.
Place the microphone toward the front to prevent it from
interfering with the cassette cover.
3.Turn the knob on the microphone holder clockwise to
secure the microphone.
4.Connect the microphone cable to the INPUT1 or INPUT2
input connector on the GY-HD100.
5.Attach the microphone cable to the clamp.
6.Make sure to perform the correct setting for use of a phan-
tom microphone.
X See page 46.
How to Attach the Viewfinder
To attach the viewfinder, slide it in the direction of the arrow.
To take off the viewfinder, pull the knob in the direction of the
arrow as you slide the viewfinder.
Pin
Hole
Clamp
1. 3. Knob
2. Microphone
Microphone
holder
5. Clamp
4. INPUT1, 2 connector
Knob
Ta ki ng off the viewfinder