Filter
Top Products
3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS
The GY-DV500 uses a lithium battery for backup of the time code data and time date data. Install the provided lithium battery before
actually using the unit.
• Lithium battery: CR2032
When the lithium battery is not in place or the battery is exhausted and requires a replacement, the "Li" indicator in the LCD display
will light up.
Replace lithium batteries with the POWER switch set to ON. Doing it with the POWER switch set to OFF will cause the loss of
backup data.
CAUTION:
If the unit is not used for a lengthy period of time (one
month or more), remove the lithium battery. If the voltage
of the lithium battery becomes low, the set may malfunction.
Lithium battery case
• How to Install the Lithium Battery
Lithium battery cover
How to Remove Lithium Batteries
The lithium battery is easily
removed if you press at the edge
of the lithium battery at the place
indicated in the illustration on the
left and then pull the battery out.
Push the lithium battery cover in the direction of the arrow
1.
2.
3.
as illustrated and remove the cover.
Slide the battery into place with its ("D marked surface facing
upward.
Return the lithium battery cover to its original position in the
unit.
E-34