Filter
Top Products
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
1. , POWER ON
First place a charged battery pack in the battery case on
the rear section of the unit If battery pack is not used,
connect DC power to the DC INPUT connector on the
rear section of the unit using the AC power adapter (AA-
P250) to supply DC 12 V current
Set the POWER switch on the unit to ON
2.
SWITCH positions
A. Set the VTR switch to STBY
B. AUTO IRIS switch, set to NORMAL
C. GAIN switch, set to L The L position is 0 dB
D. OUTPUT switch, set to CAMWJTO KNEE OFF
E. WHT BAL (Auto White Balance) switch, set to A or B
3.
4.
Set the lens ins mode switch to "A" (AUTO IRIS side)
Choose the proper colour temperature conversion filter
1
2
3
FILTER
3200K
5600K
5600K+ND
Suitable Location
Indoors, dark outdoors
Outdoors
Outdoors under clear sky
5. Using the SHUTTER dial, set the shutter speed to OFF
E-42