Filter
Top Products
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
EARPHONE
jack
MONITOR SELECT
switch
Monitoring
loudspeaker
ALARM
control
MONITOR
control
The audio input during recording, in record-pause or stop mode
can be monitored through the monitoring loudspeaker or
earphone.
• The monitoring audio is not output from the loudspeaker while
the EARPHONE jack is in use.
• Select the audio channel to be monitored using the
MONITOR SELECT switch.
CH-1 : The sound input to the CH-1 channel is output.
MIX : The sound input to the CH1 and CH2 channels is
output mixed.
CH-2 : The sound input to the CH-2 channel is output.
• The MONITOR volume control adjusts the monitoring
volume.
• The loudspeaker or earphone outputs an alarm tone in the
case of an abnormal condition occurring in the unit.
An alarm tone is also output when the tape end is reached
or when the battery is running down. The alarm tone volume
can be adjusted with the ALARM control. For details on the
alarm tone, see page 87.
1
Do not increase the audio monitoring volume
excessively; otherwise howling with the camera
microphone may occur.
E-49