Filter
Top Products
26 EN
P
L
A
Y
OFF
Manual Focusing
In contrast to auto focusing, where the camera automatically focuses on the subject, manual focusing can be
used when you want to intentionally change the point of focus in an image.
1
Turn the Power Dial, while pressing its Lock
Button, to “
M
” or “ ”.
2
Press and hold the CLEAR/FOCUS Button for
about 2 seconds.
•“ ” and “ ” appear, and the focus can be
adjusted manually.
3
Rotate the FOCUS Dial (MENU Jog Dial) to
focus the subject.
To focus on a farther subject . . .
Rotate the FOCUS Dial (MENU Jog Dial)
upward. When the focus level cannot be
adjusted any further, “ ” starts to blink.
To focus on a nearer subject . . .
Rotate the FOCUS Dial (MENU Jog Dial)
downward. When the focus level cannot be
adjusted any closer, “ ” starts to blink.
•2 focusing speeds are available. They can be
selected depending on how fast the FOCUS
Dial (MENU Jog Dial) is rotated. If the
FOCUS Dial (MENU Jog Dial) is rotated
quickly, the focus changes drastically. If the
FOCUS Dial (MENU Jog Dial) is rotated
slowly, the focus changes gradually.
FOCUS Dial
(MENU Jog dial)
Power Dial
4
Press the Shutter Release Button to shoot the
image.
NOTE:
Manual focusing is recommended in the following
cases:
●
When shooting a subject with low contrast
(variation in brightness/darkness), for example a
flat wall or blue sky.
●
When there is an obstacle such as a mesh
between the camera and the subject.
●
When the subject consists of a regular arrange-
ment of fine patterns or similar patterns.
●
When shooting under a flickering light source
such as a fluorescent lamp.
To use auto focusing in the Manual mode (“
M
”) . . .
.... press and hold the CLEAR/FOCUS Button for
about 2 seconds so that “ ” and “ ” disap-
pear.
Minimum subject distance:
The closest that this camera can focus on a subject,
with the zoom set all the way to “W”, is 7 cm.
Lock Button
Shutter Release Button
CLEAR/FOCUS Button
LCD monitor
MANUAL SHOOTING
(cont.)