Filter
Top Products
EN 61
The image on the LCD monitor
appears distorted.
The date/time is not displayed
properly.
A Compact Flash card cannot be
inserted.
None of the buttons or controls
function on the camera.
Small coloured or black spots
appear on the LCD monitor.
Preset frame images do not appear.
SYMPTOM CORRECTIVE ACTION PAGE
Others
● Is the surface or the edge of the LCD monitor
being pressed? If so, release your hand and
leave it for a while.
● The remaining power of the built-in clock
battery is close to nil. Connect the camera to the
AC power adapter and plug it in for over 24
hours.
● Is the Compact Flash card being held in the
correct direction?
● Switch the camera off, remove the power supply
(battery or AC power adapter) and press the
Reset Switch on the bottom of the camera with a
pin or similar object. All settings are returned to
their factory presets.
● The LCD monitor is manufactured using high-
precision technology, however, a few pixels on
it may be always off (black) or on (lit). This is
not due to any defect of the camera. (Function-
ing dots: more than 99.99%)
● If the built-in memory is initialized after the
message “PLEASE FORMAT” appears, the preset
frames are erased. Consult your nearest JVC
dealer.
—
9
44
9
56
—
45