Filter
Top Products
10 EN
Getting Started
Tripod Mounting
Align the camcorder stud hole with the tripod
stud, and the mounting socket with the screw
and lock it in place.
Grip Adjustment
Open the pad and make grip adjustments.
• Remove any security tags that may be
attached to the velcro.
Bottom of the
camcorder
Using the SD Card
Set the power switch to “OFF”.
1
Open the card cover.
2
Firmly insert the card with its clipped edge
first.
3
Close the Card cover.
To remove the SD Card
Push the SD Card once. After the card comes
out a little, pull it out.
• Do not touch the terminal on the reverse
side of the label.
Notes:
• Some brands of memory cards are not
compatible with this camcorder. Before
purchasing a memory card, consult its
manufacturer or dealer.
• Before using a new memory card, it is
necessary to format the card ( 28).
PLEASE FORMAT
Appears when there is a problem with a
memory card and its memory is corrupt, or it
has not been initialized. Intialize the memory
card. ( 28)
CARD ERROR!
Appears when the camcorder does not
recognize the loaded memory card. Remove the
memory card once and insert it again.
Repeat these procedures until no indication
appears. If the indication still appears, the
memory card is corrupted.
Clipped edge
Card Cover
( )
Memory Card
(optional)
Velcro Strip