JVC LYT1805-001A Camcorder User Manual


 
EN 43
Connections/Editing
ENGLISH
Connection To A Personal
Computer
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
Connect the DV cable first to the PC, and
then to the camcorder.
Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[A] Using USB cable
It is possible to transfer still images stored on
a memory card to a PC.
[B] Using DV cable
It is also possible to transfer still/moving
images to a PC with a DV connector by using
the provided software, software equipped with
the PC or commercially available software.
If you are using a Windows
®
XP, you can
use Windows
®
Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
Windows
®
Messenger.
Notes:
Refer to “SOFTWARE INSTALLATION AND
USB CONNECTION GUIDE” for the bundled
software and drivers.
It is recommended to use the AC Adapter
as the power supply instead of the battery
pack ( 16).
Never connect the USB cable and the DV
cable simultaneously to the camcorder.
Connect only the cable you wish to use to
the camcorder.
When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U
DV cable depending on the type of DV
connector (4 or 6 pins) on the PC.
If the PC connected to the camcorder via the
USB cable is not powered, the camcorder does
not enter the USB mode.
The date/time information cannot be captured
into the PC.
Refer to the instruction manuals of the PC and
Software.
The still images can also be transferred to a
PC with a DV connector-equipped capture
board.
The system may not work properly depending
on the PC or capture board you are using.
If, after connecting a DV cable to the
camcorder and it doesn’t work, restart the
camcorder.
Do not remove memory card during USB
connection between PC and set.
“USB” and/or “ ” appears on the
LCD monitor while the PC is accessing
data in the camcorder or the camcorder is
transferring a file to the PC.
NEVER disconnect the USB cable
while “ ” is displayed on the LCD
monitor since this can result in product
damage.
USB connector
Core filter
Core filter
DV cable
(optional)
or
PC with DV connector
To DV
Connector
To USB
connector
USB Cable
(provided)
DV connector
[A]
[B]