JVC LYT1805-001A Camcorder User Manual


 
50 EN
Cautions
How To Handle A CD-ROM
Take care not to soil or scratch the mirror
surface (opposite to the printed surface).
Do not write anything or put a sticker on either
the front or back surface. If the CD-ROM gets
dirty, gently wipe it with a soft cloth outward
from the center hole.
Do not use conventional disc cleaners or
cleaning spray.
Do not bend the CD-ROM or touch its mirror
surface.
Do not store your CD-ROM in a dusty, hot or
humid environment. Keep it away from direct
sunlight.
Memory Cards
To properly use and store your memory cards,
be sure to read the following cautions:
During use
... make sure the memory card bears the SD or
MultiMediaCard mark.
... make sure the memory card is positioned
properly when inserting.
While the memory card is being accessed
(during recording, playback, deletion,
initialization, etc.)
... never unload the memory card and never turn
off the camcorder.
Store memory cards
... away from heaters or other heat sources.
... out of direct sunlight.
... where they won’t be subject to unnecessary
shock or vibration.
... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
About moisture condensation
You have observed that pouring a cold
liquid into a glass will cause drops of
water to form on the glass’ outer surface.
This same phenomenon occurs on the
head drum of a camcorder when it is
moved from a cool place to a warm
place, after heating a cold room, under
extremely humid conditions or in a place
directly subjected to the cool air from an
air conditioner.
Moisture on the head drum can cause
severe damage to the video tape, and can
lead to internal damage to the camcorder
itself.
CONDENSATION, OPERATION
PAUSED PLEASE WAIT
Appears if condensation occurs. When this
indication is displayed, wait more than 1 hour
until condensation disappears.