Filter
Top Products
EN 33
Menus for Detailed Adjustment
ENGLISH
The “SETTING” functions which are set when the Power Switch is set to “REC” are also applied
when the Power Switch is set to “PLAY”.
Menus Settings: [ ] = Factory-preset
SETTING
LANGUAGE 日本語 / 한국어 / 繁體字 / [ENGLISH] / FRANCAIS / ESPAÑOL /
PORTUGUÊS
The language setting can be changed. ( 17)
CLOCK ADJ.
17, “Date/Time Settings”.
MELODY
OFF: Even though not heard while shooting, shutter sound is
recorded on the tape.
[ON]: A melody sounds when any operation is performed. It also
activates the shutter sound effect.
REMOTE
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
DEMO MODE
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Wipe/Fader and
Effects, etc., and can be used to confirm how these functions
operate.
Notes:
• Demonstration starts in the following cases:
• When the Menu Screen is closed after “DEMO MODE” is turned
“ON”.
• With “DEMO MODE” set to “ON”, if there is no operation for about 3
minutes after the Power Switch is set to “REC”.
• Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for more than
3 minutes after that, the demonstration will resume.
• Demonstration cannot be turned on in the following conditions:
• If a cassette is in the camcorder.
• If the Power is not supplied from the AC Adapter.
• “DEMO MODE” remains “ON” even if the camcorder power is turned
off.
CAM RESET
[CANCEL]: Does not reset all settings to the factory-preset.
EXECUTE: Resets all settings to the factory-preset.
CONTINUED ON NEXT PAGE
Playback Menus
The settings below are effective only for video playback except “REC MODE” and “SNAP/
SLOW”.
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made,
and plays the sound back. Select the sound to accompany your playback picture.