JVC LYT1805-001A Camcorder User Manual


 
40 EN
Features for Recording
NIGHT :
Makes dark subjects or areas even brighter
than they would be under good natural
lighting. Although the recorded image is not
grainy, it may look as if it is strobing due to the
slow shutter speed.
During Night-Alive, it may be difficult to bring
the camcorder into focus. To prevent this, use
of a tripod is recommended.
[ ] = Factory-preset
EFFECT
[OFF]:
Disables the function.
SEPIA :
Recorded scenes have a brownish tint like old
photos.
MONOTONE :
Like classic black and white films, your footage
is shot in B/W.
CLASSIC* :
Gives recorded scenes a strobe effect.
STROBE* :
Your recording looks like a series of
consecutive snapshots.
MIRROR* :
Creates a mirror image on the left half of the
screen, juxtaposed to the normal image on the
other half.
* Not available for still image recording.
[ ] = Factory-preset
SHUTTER
[OFF]:
Disables the function.
1/60
SHUTTER 1/60:
The shutter speed is fixed at 1/60th of a
second. Black bands that usually appear when
shooting a TV screen become narrower.
1/100
SHUTTER 1/100:
The shutter speed is fixed at 1/100th of a
second. The flickering that occurs when
shooting under a fluorescent light or mercury-
vapour lamp is reduced.
SHUTTER 1/500 / SHUTTER 1/4000*:
(Refer to “PROGRAM AE” - “SPORTS H
mode)
* Not available for still image recording.
[ ] = Factory-preset
Dubbing Still Images
Recorded On A Tape To A
Memory Card
Still images can be dubbed from a tape to a
memory card.
Preparation:
Load a cassette ( 18).
Load a memory card ( 10).
1
Set the MEMORY/VIDEO Switch to
VIDEO”.
2
Set the Power Switch to “PLAY” ( 13).
3
Set “[T]Z[M] COPY” to “ON” ( 34).
4
Set “SNAP/SLOW” to “SNAP”. ( 31)
5
Press 6 to start playback.
6
At the point you want to dub, press 6
again to engage Still Playback.
7
To dub the image, press SNAPSHOT.
The “Z ” indication appears during
dubbing.
Note:
To use Playback Special effects with a video
image you wish to dub, perform up to step
7
using the remote control ( 23).