Filter
Top Products
3-1
3
Computer Setup
Using DC25
with Your
Computer
Connecting the DC25 to Your Computer
☞ The camera and the PC should be turned off before connecting the serial
cable.
You are now ready to transfer the pictures from the camera to your computer
using any one of the software packages.
Refer to the appropriate chapters of this user’s guide or the software’s quick
reference guides for more information on the software packages.
1 Plug one end of the serial cable into the printer
or a COM port on the back of your computer.
☞ If your computer has a 25-pin port, you need to
purchase a 9-pin adapter and attach it to the
port before attaching the serial cable to the
computer.
2 Lift the rubber tab on the camera.
3 Plug the other end of the serial cable into the
camera’s serial port.
4 Turn on the camera.
DC25
CAMERA
KODAK
DC25 DIGITAL
STANDARD HIGH
OFF AUTO FILL