Filter
Top Products
3-2
Checking Serial Port Availability
If your computer cannot communicate with the DC25, you may need to adjust the
serial port configuration on the computer.
First verify that there are no serial port conflicts with other items on your
computer. To verify select Start-Settings-Control Panel-System from the file
menu. Select Device Manager Tab, and then the appropriate COM and LPT ports
and the communications port (COM1). Check the status and make the
appropriate changes. This is not recommended if the device appears to function
properly.
If your computer still does not recognize that the DC25 is attached and turned on,
you may need to adjust the serial port and speed settings.
1 Open PhotoEnhancer Software.
2 From the Camera pulldown menu select Set Camera Communications.
3 Select DC25 from the Camera Type field.
4 From the Camera Port field select COM 1 or the port you have connected the
camera to.
5 Adjust Camera Port Speed up or down by one setting.
6 Click OK.
7 Open the PhotoEnhancer Express menu and select Photo Center.
8 Select Preview pictures from DC20/DC25.
9 If the software does not recognize the DC25, continue to adjust the serial port
speed on COM1, and the other COM ports until the DC25 is recognized.
Once your computer can communicate with your camera, gradually increase
speed to optimize transfer picture time.