Filter
Top Products
30
Connecting the Camera to Your Computer
An RS-232 serial cable is provided, so you can connect your camera to a
Windows-based computer. When connecting the camera, use a KODAK-
specified AC adapter. For details about available accessories, ask a dealer of
KODAK products, or visit our Web site at http://www.kodak.com/go/
accessories.
1 With the computer turned off, plug the
appropriate end of the serial cable into an
available 9-pin serial port on the computer.
Serial ports are usually labeled COM1 and
COM2, or A and B. If your computer has a
25-pin port, you need to attach a 9-pin adapter
(available at your local computer store) to the
port before attaching the serial cable to the
computer.
If the ports are not labeled, see your computer
User’s Guide for a diagram that illustrates the
external ports.
2 Plug the other end of the serial cable into the
serial port on the side of your camera.
3 Turn the computer on.
4 Set the camera Power/Mode switch to the
position.
5 Press the MENU button to display the Menu
screen on the LCD.