Filter
Top Products
To set the flash mode, simply press the flash-mode/copy but-
ton on the back of the camera until the appropriate mode is
indicated.
Autoflash - the flash fires automatically in low-light situations.
If the flash will fire, the flash indicator will appear on the LCD
monitor when the shutter-release button is pressed partway
down.
Fill-flash - the flash fires with each exposure regardless of
the amount of ambient light. Fill-flash can be used to reduce
harsh shadows caused by strong direct light or sunshine.
Red-eye reduction - multiple flashes are used before the
main flash burst to reduce red-eye; an effect caused by light
reflected from the retina. Use in low-light conditions when tak-
ing photographs of people or animals. The pre-flashes con-
tract the pupils of the subject’s eyes.
Flash cancel - the flash will not fire. Use flash cancel when
flash photography is prohibited, natural light is desired to illu-
minate the subject, or the subject is beyond the flash range.
26 AUTO-RECORDING MODE
Autoflash
Autoflash with
red-eye reduction
Flash cancel
Fill-flash
Flash modes
AUTO-RECORDING MODE
This section covers the operation in auto-recording mode. The sophisticated tech-
nology employed in this mode frees the photographer from complicated camera
settings. Although automated, the camera’s operation can be changed to meet
various conditions as well as to suit personal shooting preferences.
No
Indicator