Filter
Top Products
47
Connecting the camera to a computer
1.The memory-type option in the setup mode must be
set to the storage location of the images (p. 38 and
45). Turn the mode dial to the data transfer position.
Confirm the battery has sufficient power before connecting the camera to a computer, the full-battery
indicator should be displayed on the monitor. The auto power off function is disabled when the cam-
era is connected to a computer. The use of the AC adapter (sold separately) is recommended over
the use of the battery. For users with Windows 98 or 98SE, read the section on how to install the
required USB driver before connecting the camera to a computer (p. 49).
4.Attach the other end of the USB cable
to the computer’s USB port. Make
sure the plug is firmly attached.
•The camera should be connected
directly to the computer’s USB port.
Attaching the camera to a USB hub
may prevent the camera from
operating properly.
• When the camera is connected to a
computer, the LCD monitor is off.
4
3.Open the terminal cover. Attach the
smaller plug of the USB cable to the
camera. Make sure the plug is firmly
attached.
3
2.Start up the computer. The computer
must be on before connecting the
camera.
1
PC MODE