Filter
Top Products
Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Close the window,
turn the camera off, and then discon-
nect the USB cable.
54 DATA TRANSFER MODE
Disconnecting the camera from the computer
Windows Me, 2000 Professional, and XP
Confirm that the green indicator lamp is not blinking. Turn the camera off and then disconnect the
USB cable.
To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window will open indicating the device to be stopped.
Windows 98 / 98 Second Edition
When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.
Never disconnect the camera when the indicator lamp is blinking
- the data or memory card may permanently be damaged.
Follow the instruction below when disconnecting the camera from the computer. This procedure is
also necessary before changing the memory type while the camera is connected to the computer.
The appearance of screens may differ with the operating system.