Filter
Top Products
15
INSERTING A BATTERY
This digital camera uses one NP-600
lithium-ion battery. Before using the battery,
read the safety warnings on page 3 of this
manual. When replacing the battery, the
camera should be turned off.
Slide the battery-chamber door toward the
side of the camera to release the safety
catch (1). Open the door.
Insert the battery (2).
Close the battery-chamber door (3) and
slide it toward the camera to engage the
safety catch.
After initially installing the battery, the menu
language, clock, and calendar need to be
set. The camera can also reset if the
camera is stored without a battery. See
page 21 on how to set up the camera.
2
After initially inserting a charged battery, do not remove it from the camera for twenty-four hours;
the camera can be off during this period. The lithium-ion battery is used to charge an internal
battery, which protects settings when the camera is turned off.
Camera notes
3
1