Filter
Top Products
24 RECORDING - BASIC OPERATION
BASIC RECORDING OPERATION
Press the shutter-release button partway down (1) to lock
the focus and exposure.
The monitor focus signal and viewfinder indicator lamp
glows when the focus is locked; the flash signal appears if
the flash is going to fire. If the focus signal and indicator
lamp blink, the camera could not focus, repeat the
procedure.
Place the subject within the AF area.
The focus-lock function (p. 25) can be used with off-center
subjects. If the subject is closer than 1m (3ft.) at the zoom
lens’ wide-angle position or 3m (10ft) at the telephoto
position, only use the LCD monitor to frame the subject.
2
1
Press the shutter-release button all the way down (2) to
take the picture.
After the shutter releases, the viewfinder indicator lamp
glows while image data is being written to the memory card.
Never remove a memory card while data is being
transferred.
If the shutter-release button is pressed and held, a series of
consecutive images is captured. The previous image is
displayed between exposures.
Focus signal