Leica 18430 Digital Camera User Manual


 
116
THE MOST IMPORTANT SETTINGS / CONTROLS
MAIN SWITCH
The Leica X Vario is turned on and off using the main switch (7).
OFF = Off
S = Single pictures
C = Continuous (picture series)
Frame Rate
Frequencies of 3 fps (
Low) or 5 fps (High) are available:
Select
Continuous Shooting
in the menu and then the required
setting in the submenu
If the camera is turned on, the monitor image appears.
Notes:
Picture series are not possible when using the fl ash. If a fl ash
function is activated, only one picture is taken.
If the main switch is set to
C and the self timer is used at the same
time, only a single picture is taken.
• The maximum picture frequency of 5 fps is only available with
shutter speeds of
1
/
60
s or faster (
1
/
4
s at 3 fps).
• After a series with the maximum length of 7 pictures, the frequency
with which they are taken declines slightly. This is due to the time
required to transfer the data from the buff er memory to the card.
Regardless of how many pictures are taken in a series, the last
picture is always shown when they are reviewed. You can select
the other pictures in the series by pressing right or left on the
direction pad (25).