Filter
Top Products
144TPS1200
Safety Directions
Do not look through or beside the optical sight at prisms or reflecting objects when
the laser is switched on, in laserpointer or distance measurement mode. Aiming at
prisms is only permitted when looking through the telescope.
ƽ
Warning The use of Laser Class 3R equipment can be dangerous.
Precautions:
To counteract hazards, it is essential for every user to respect the safety precautions
and control measures specified in the standard IEC 60825-1 (2001-08) resp.
EN 60825-1:1994 + A11:1996 + A2:2001, within the hazard distance *); pay partic-
ular attention to Section Three "User's Guide".
Following an interpretation of the main points in the relevant section of the standard
quoted.
Class 3R Laser Products used on construction sites and outdoors, for example
surveying, alignment, levelling:
a) Only qualified and trained persons should be assigned to install, adjust and
operate the laser equipment.
b) Areas in which these lasers are used should be posted with an appropriate laser
warning sign.
c) Precautions should be taken to ensure that persons do not look directly, with or
without an optical instrument, into the beam.