Filter
Top Products
98TPS1200
Check & Adjust
5. MEAS (F1) to measure and to continue to the next screen.
Motorised instruments change auto-
matically to the other face.
Non-motorised instruments guide to
the other face.
)
The fine pointing has to be
performed manually in both faces.
6. TOOLS Combined II
MEAS (F1) to measure the same target in the other face and to calculate
the instrument errors.
)
If one or more errors are bigger than the predefined limits, the procedure
has to be repeated. All measurements of the current run are rejected and
none of them is averaged with the results from previous runs.
7. TOOLS Adjustment Accuracy
Step Description
TPS12_025
180°
180°