Filter
Top Products
Form C Supplemental Instructions:
Button Templates
8
There are eight pages to Form C—one page for each type of system phone and
one page for an Intercom Autodialer. Use Form C to record line and pool button
assignments and to indicate programming for system telephone buttons that do
not have lines or pools assigned if the programming is to be performed from
extension 10 or 11 during system installation. After installation, users can program
additional features using the instructions on their Quick Reference cards.
A telephone button can be programmed as a line button (to access an outside
line), as a pool button (to access a pool), as an Auto Dial button (to dial a phone
number or a PBX/Centrex feature access code with one touch), or as a dial-code
feature button (to access a dial-code feature with one touch). Line and pool
buttons must have status lights; some features also require buttons with lights
(see "Button Feature Summary").
Using the information from Line Ringing and Line/Pool Access Restriction on
Form B2, fill out Form C as follows:
Make as many copies of each page of Form C as you need. Where line, pool,
and other button assignments are identical for two or more phones of the same
type, you can use one copy of the form and indicate the extension numbers
sharing the programming in the space provided at the bottom of the form.
Use either the button template (to record the exact location of buttons and
the programming assigned to them) or the Check Desired Features checklist
(to identify features to be programmed), or both. By default, lines are
assigned to buttons in the following order:
PARTNER-34D Telephone
21 22
23
24
17
18
19
20
13
14
15
16
7
8
9
10
11
12
1 2
3
4
5
6
PARTNER-18D and PARTNER-18 Telephones
13
14 15
16
9
10
11
12
5 6
7 8
1 2
3
4
PARTNER-6 Telephone
3 4
1 2
MLS-34D Telephone
21
22
23
24
17 18
19
20
13 14 15
16
9
10
11
12
5
6
7 8
1
2
3
4
MLS-18D, MLS-12D, and MLS-12 Telephones
13
14
15
16
9
10
11
12
5
6
7
8
1
2
3
4
NOTE: On MLS-12D and MLS-12 telephones, only buttons 1 through 10
have lights and can have lines assigned.
MLS-6 Telephone
1 2 3
4
In Hybrid mode, the main pool (880) is assigned to the two leftmost buttons
on the bottom row (shown with
★ on Button Template forms) of all pooled
extensions; the location of these buttons cannot be changed. However, the
main pool can be removed from extensions, in which case the buttons are
available for other line, pool, Auto Dial, or dial-code feature assignments.
Lines also can be assigned to auxiliary pools (881, 882, or 883) and these
auxiliary pools can be assigned to any buttons with lights.
Indicate the order in which a line or pool is selected when the user lifts the
handset or presses
Spkr to place a call without first pressing a line or pool
button (Automatic Line Selection) if the order is to be different than the
default (key extensions: outside lines in ascending numerical order followed
by intercom; pooled extensions: main pool button 1, button 2, intercom).
■
■
■