Microtek MV300 Camcorder User Manual


 
40
Appendix C Troubleshooting
A1: The DV camera is not powered up.
Press and hold the POWER button for a few moments to see if the
READY LED is lit.
A2: The battery is inserted incorrectly.
Insert the battery with the correct polarity as marked in the battery
compartment.
A3: The battery has poor electrical contact with the terminals in the
battery compartment.
Clean the battery terminals with a dry cloth, reinsert them, and try
to power on the DV camera again.
A4: Battery power is depleted.
Recharge the battery if it is rechargeable, or replace the batteries
with new ones.
A5: The incorrect type of battery is being used.
Replace with four new AAA-size alkaline batteries.
Replace with a new Lithium ion battery (Nokia 8210 compatible).
A6: The battery/SD card cover is open.
Close the battery/SD cover securely.
A1: Your DV camera has a two-minute time-out setting for saving the
battery consumption.
You can disable the “Power Saving” feature in the DV camera's
Setup mode menu. Press any button to turn the DV camera back on.
A2: Battery power is depleted.
Recharge the batteries if they are rechargeable, or replace the
batteries with new ones.
DV Camera Problems
The DV camera does not power on.
The DV camera turns off suddenly.