Nikon 13302 Digital Camera User Manual


 
37
s
3 Frame the photograph.
Frame a photograph in the viewfinder with the
main subject in the AF area brackets.
4 Press the shutter-release button halfway.
Press the shutter-release button halfway to focus.
The
active focus point will be displayed.
If the subject is poorly
lit, the flash may pop up and the AF-assist illuminator may
light.
5 Check the indicators in the viewfinder.
When the focus operation is complete, the in-
focus indicator (I) will appear in the viewfinder.
While the shutter-release button is pressed halfway, the number of exposures
that can be stored in the memory buffer (“t”; 0 58) will be displayed in the
viewfinder.
6 Shoot.
Smoothly press the shutter-release button the
rest of the way down to release the shutter and
record the photograph.
The memory card access
lamp next to the memory card slot cover will
light while the photograph is being recorded to
the memory card.
Do not eject the memory card
or remove or disconnect the power source until the
lamp has gone out and recording is complete.
In-focus
indicator Description
I Subject in focus.
2 4 Focus point is between camera and subject.
2 4 Focus point is behind subject.
24
(flashes)
Camera unable to focus using autofocus.
See page 72.
AF area brackets
Focus point
In-focus
indicator
Buffer
capacity
Memory card access
lamp