Filter
Top Products
96
r
5 Check the results.
If the camera was able to measure a
value for white balance, the message
shown at right will be displayed.
If lighting is too dark or too bright, the
camera may be unable to measure white
balance and the message shown at right
will be displayed.
Return to Step 4 and
measure white balance again.
A Other Methods for Measuring Preset White Balance
To enter preset measurement mode (see above) after selecting preset
white balance in the information display, press J for a few seconds.
If
white balance has been assigned to the S (g) button, white balance
preset measurement mode can be activated by keeping the S (g)
button pressed for a few seconds after selecting preset white balance
with the S (g) button and command dial.