Filter
Top Products
129
t
5 Start shooting.
Highlight On and press J
(to return to the shooting
menu without starting the
interval timer, highlight
Off and press J).
The first
series of shots will be taken at the specified starting time, or
after about 5 s if Now was selected for Choose start time in
Step 2.
Shooting will continue at the selected interval until all
shots have been taken.
Note that because shutter speed and
the time needed to record the image to the memory card
may vary from shot to shot, intervals may be skipped if the
camera is still in the process of recording the previous
interval.
If shooting can not proceed at current settings (for
example, if a shutter speed of “A” is currently selected in
shooting mode M or the start time is in less than a minute), a
warning will be displayed in the monitor.
If the interval between shots is long enough while the camera
is powered by a battery, the monitor will turn off and the
power-on lamp will flash between shots. Pictures can not be
played back, but images will be displayed in the monitor
automatically after shooting. Manual override (0 74) is not
available with autofocus during interval timer shooting; to
focus manually, select manual focus mode.
A Out of Memory
If the memory card is full, the interval timer will remain active but no
pictures will be taken. Resume shooting after deleting some pictures or
turning the camera off and inserting another memory card.