Filter
Top Products
195
U
If Release locked is selected, the shutter-release button is only
enabled when a memory card is inserted in the camera.
Selecting
Enable release allows the shutter to be released when no memory
card is inserted, although no pictures will be recorded (they will
however be displayed in the monitor in demo mode).
This option is displayed only when an Eye-Fi memory card
(available separately from third-party suppliers) is inserted in the
camera.
Choose Enable to upload photographs to a preselected
destination.
Note that pictures will not be uploaded if signal
strength is insufficient.
Observe all local laws concerning wireless devices. Where wireless
devices are prohibited, remove the card from the camera, as the
card may continue to emit wireless signals even when Disable is
selected.
When an Eye-Fi card is inserted, its status is
indicated by an icon in the monitor:
• d: Eye-Fi upload disabled.
• e: Eye-Fi upload enabled but no pictures
available for upload.
• f (static): Eye-Fi upload enabled; waiting to
begin upload.
• f (animated): Eye-Fi upload enabled; uploading data.
• g: Error — camera can not control Eye-Fi card.
Slot Empty Release Lock
G button ➜ Bsetup menu
Eye-Fi Upload
G button ➜ Bsetup menu