92
Using Menus
q Tapping the Monitor to Release the Shutter (Touch
Shutter)
* This setting can also be changed in shooting modes other than auto. The changed
setting is also applied to other shooting modes.
Tap the desired subject to take a
picture.
• Do not use force when tapping the monitor as
this may cause slight movement of the camera,
resulting in blurred images.
• When digital zoom is in effect, the camera
focuses on the subject in the center of the frame.
• The shutter-release button can also be used
when the touch shutter option is selected.
• If X is displayed when the monitor is tapped,
the shutter cannot be released. Tap an area
within X.
B Notes About Touch Shutter
• The focus area that can be set varies depending on the shooting mode (A91).
• When a subject displayed in the monitor is tapped after the self-timer (A45) is set,
the camera locks focus and releases the shutter after 10 or 2 seconds.
• This function may not be available to use in combination with other functions
(A55).
Enter shooting mode* M tap F M Touch shooting M q Touch shutter
M tap S
880
880
25
m
0s
25
m
0s
880
880
25
m
0s
25
m
0s