Filter
Top Products
115
Using Menus
View Log
Check or erase the log data stored on the memory card using Create log
(A114).
Set Clock from Satellite
Signals from the positioning satellites are used to set the date and time of the
camera’s internal clock. Check the positioning status before setting the clock
using this option.
B Notes About Set Clock from Satellite
• To set the camera's internal clock, positioning must have been done successfully
(A132).
• Date/time adjustment by Set clock from satellite is set according to the time
zone set in Time zone and date (A119) in the setup menu. Check the time zone
before setting Set clock from satellite.
• The date/time set using Set clock from satellite is not as accurate as radio clocks.
Use Time zone and date in the setup menu to set the time if it is not accurate in
Set clock from satellite.
Press the d button M z (location data options) menu icon M View log
M k button
Option Description
Location logs
Select a log (date) that you want to display and press the
k button to display a location log on a map (A144).
• Press the l (delete) button to delete the selected log or
all saved location logs.
Altitude/depth logs
Select a log (date) that you want to display and press the
k button to display the altitude or water depth data as a
graph (A145).
• Press the l (delete) button to delete the selected log or
all saved altitude/depth logs.
Press the d button M z (location data options) menu icon M Set clock
from satellite M k button