Nikon 26492 Digital Camera User Manual


 
147
Using the Wi-Fi (Wireless LAN) Function
1 Press the Z (Wi-Fi) button on the
camera.
The screen shown on the right is displayed.
If no connection confirmation is received
from the smart device within three
minutes, No access. is displayed and the
camera returns to the Wi-Fi options screen.
You can also select Connect to smart
device in the Wi-Fi options menu to
display the screen shown on the right.
2 Set the Wi-Fi setting on the smart device to On.
Check the user’s manual provided with your smart device for further details.
After the network names (SSIDs) that can be used for the smart device are
displayed, select the SSID displayed on the camera.
When Auth./encryp. in the Wi-Fi options menu is set to WPA2-PSK-AES,
the message for entering a password is displayed. Enter the password that is
displayed on the camera.
3 While “Negotiating... Please wait.” is displayed on the camera,
start the “Wireless Mobile Utility” installed on the smart device.
The screen for selecting “Take photos” or “View photos” is displayed.
When the message “Cannot connect to camera.” is displayed, return to step
1 and retry the procedure.
“Installing the Software on the Smart Device” (A146).
C Touching an NFC-compatible Smart Device to the Camera for a
Wi-Fi Connection
When you use an Android OS smart device that is
compatible with near field communication (NFC)
functions, you can establish a Wi-Fi connection and start
the “Wireless Mobile Utility” by touching the NFC antenna
of the smart device to the Y (N-Mark) on the camera.
Connecting the Smart Device to the
Camera
Connect to smart device
XXXXXX
SSID:
XXXXXXXXXXXXXXXXXX
Cancel