Filter
Top Products
Technical Notes
176
Nikon Transfer 2
does not start
when the camera
is connected to a
computer.
• The camera is off.
• The battery is exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the computer.
• The computer is not set to start Nikon Transfer 2
automatically. For more information about
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
–
130,
150
150,
157
–
–
The PictBridge
startup screen is
not displayed
when the camera
is connected to a
printer.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed and
it may be impossible to print images when Auto is
selected for Charge by computer in the setup
menu. Set Charge by computer to Off and
reconnect the camera to the printer.
78, 130
Images to be
printed are not
displayed.
• The memory card contains no images.
• Remove the memory card to print images in the
internal memory.
–
7
Cannot select
paper size with
the camera.
The camera cannot be used to select the paper size
in the following situations, even when printing from
a PictBridge-compatible printer. Use the printer to
select the paper size.
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper size.
–
Problem Cause/Solution A