Filter
Top Products
141
Using Location Data Functions/Displaying Maps
1 Use the multi selector HI to
select the type of log to record,
and press the k button.
• Start all logs: Location, altitude, and water
depth data logs are recorded.
• Start location log: A location data log is
recorded.
• Start depth log: A water depth log is
recorded.
2 Select the interval to use for log
recording, and press the k
button.
• The intervals that can be set vary
depending on the type of log that is
recorded.
• If Start depth log was selected, log
recording starts (the time duration is fixed
at one hour).
3 Select the duration of the log
recording, and press the k
button.
• Log recording starts. Press the d button
to exit the menu screen.
• D is displayed on the shooting screen
during log recording (A3).
• Log recording automatically ends when the
specified time elapses, and the log data is temporarily recorded on the
camera. Save the log data to a memory card when log recording is complete
(A143).
• Logs that are saved to a memory card can be displayed on a map or as a
graph (A144, 145).
Recording Movement Data Logs
Press the d button M z (location data options) menu icon M Create
log M k button
Create log
Start all logs
End all logs
Start location log
End location log
Start depth log
End depth log
Log interval
15 s
30 s
1 min
3 min
5 min
10 min
Start log
Log data for next 6 hrs
Log data for next 12 hrs
Log data for next 24 hrs
Log data for next 72 hrs