Filter
Top Products
132
Using Location Data Functions/Displaying Maps
Using Location Data Functions/
Displaying Maps
The camera starts to receive signals from positioning satellites when Record
location data in Location data options in the z (location data options)
menu (A78) is set to On.
Reception status can be checked on the shooting
screen.
• n or o: The camera receives signals from three
or more satellites and is calculating the location
data.
• z: The camera receives signals, but is not able to
perform positioning.
• y: The camera does not receive signals.
Recording the Shooting Location Data to Images
• The camera records location data (latitude and longitude) to images when
shooting while the camera is positioning.
• When Compass display in Electronic compass in the location data
options menu is set to On, the approximate direction of shooting is also
recorded.
Recording Logs
• When the camera is positioning and Create log in the location data options
menu is set to Start all logs, you can record location data, altitude, and
water depth data at specified intervals while you move around with the
camera.
• Recorded logs (movement information such as location data, altitude, or
water depth) can be saved on a memory card and can be displayed as a
map or a graph when View log in the location data options menu is
selected. To save a log, select Create log and stop recording, and then
select Save logs.
Displaying a Map
• The current position is displayed on a map when you press the U (map)
button while the shooting screen is displayed and the camera is positioning.
• The image shooting location is displayed when you play back an image with
recorded location data and press the U button.
0
-10
1010hPa
1010hPa
1010hPa
15m
15m
15m