Filter
Top Products
Technical Notes
165
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution
A
Battery temperature is
elevated. The camera will
turn off.
The camera turns off automatically. Wait
until the camera or battery temperature
has cooled before resuming use.
–
The camera will turn off
to prevent overheating.
Memory card is write
protected.
The write-protect switch is in the “lock”
position. Slide the write-protect switch to
the “write” position.
–
This card cannot be used. An error occurred while accessing the
memory card.
• Use an approved memory card.
• Check that the terminals are clean.
• Confirm that the memory card is
correctly inserted.
6, 197
This card cannot be read.
Card is not formatted.
Format card?
The memory card has not been
formatted for use in the camera.
Formatting deletes all data saved on the
memory card. If you need to keep copies
of any images, make sure to select No
and save the copies to a computer or
other medium before formatting the
memory card. Select Yes and press the
k button to format the memory card.
163
Out of memory.
Delete images or insert a new memory
card.
6, 16
Image cannot be saved.
An error occurred while saving the image.
Insert a new memory card or format the
memory card or internal memory.
129
The camera has run out of file numbers.
Insert a new memory card or format the
memory card or internal memory.
129
There is insufficient space to save the
copy.
Delete images from the destination.
16