Filter
Top Products
112
t
A
Optional Flash Units
Detailed instructions may be found in the manual provided with the
flash unit. Note that optional flash units may not fire at some camera
settings.
A
The Flash/Capture-Illuminator Status Indicators
Users of the SB-N5 are directed to check the table below if the flash sta-
tus or capture-illuminator status indicator on the rear of the unit
flashes. Users of the SB-N7 may refer to the manual provided with the
flash unit.
Display Description
The flash status indicator flashes
for about 3 seconds after a photo-
graph is taken.
Subject may be underexposed. Try again
after reducing distance to subject or rais-
ing ISO sensitivity (0 201).
The flash or capture status indica-
tor flashes once a second.
Product has fired several times in quick
succession and has shut down tempo-
rarily to prevent overheating. Turn prod-
uct off and wait for it to cool.
The flash and capture status indi-
cators flash once every 2 seconds.
A data transfer error has occurred. Check
that the flash unit is correctly attached.
The flash status indicator flashes
8times a second.
An error has occurred in the unit’s inter-
nal circuitry. Turn the camera off, remove
the flash unit, and take the camera and
flash unit to a Nikon-authorized service
center for consultation.