Filter
Top Products
45
More on Photography
Vibration Reduction (VR)
When vibration reduction is on, the camera detects and factors out panning
movements. If the camera is panned horizontally, for example, vibration re-
duction reduces only vertical shake. If the camera is panned vertically, vibra-
tion reduction affects only horizontal shake.
Vibration Reduction
Turn VR off when using a tripod.
Vibration reduction may take a few seconds to activate after the camera recovers from
sleep mode ( 14) or the power is turned on. Wait until the display stabilizes before
shooting. There may also be a slight display lag after a picture is taken.
If camera shake is particularly severe, select Active for VR mode ( 103). Choose
Normal in other situations.
If Wide adapter or Telephoto is selected for Lens ( 97), vibration reduction will be
optimized for use with the WM-E80 (Wide adapter) or TC-E17ED (Telephoto). VR is
not available when Fisheye is selected.
When making long time exposures, turn VR off and use a tripod ( 51).
8M
F2.8
1/60
126
2
Slide VR switch to ON. VR icon
appears in shooting display.
1
Rotate mode dial to , , P, S, A,
M, or .
3
Frame picture and focus. Wait for dis-
play to stabilize before shooting.
Vibration reduction adjusts the lens to compensate for slight hand move-
ments that can blur pictures or cause shake in the shooting display while
shooting still pictures or movies. Vibration reduction reduces the shutter
speed at which pictures are blurred by about three steps. It also reduces blur
when the camera is zoomed in, especially if the subject is moving or lighting
is dim. To use vibration reduction: