Nikon COOLPIX S6300 Digital Camera User Manual


 
E5
Reference Section
Using 3D Photography
The camera captures one image for each eye to simulate a three-dimensional
image on a 3D-compatible TV or monitor.
* The icon of the last scene selected is displayed. The default setting is x (scene auto
selector).
1 Frame the subject.
The focus area can be moved from the center of the
frame to a different position. To move the focus area,
before taking the first picture, press the k button, and
then rotate the multi selector or press H, I, J, or K.
To change settings for any of the following functions,
first press the k button to cancel focus-area selection,
then change the settings as desired.
-Macro mode
- Exposure compensation
2 Press the shutter-release button to take the
first picture.
The focus, exposure, and white balance are locked after
the first shot, and R is displayed on the
monitor.
3 Move the camera horizontally to the right
until the translucent guide is aligned with the
subject.
To cancel shooting, press the k button.
4 Wait for the camera to automatically take the second picture.
The camera automatically captures the second image when it detects that the subject
is aligned with the guide.
Shooting is canceled if the subject is not aligned with the guide within approximately
ten seconds.
Enter shooting mode M A (shooting mode) button M x (second icon from the top*)
M K M s (3D photography)
11 40
1140
29m 0s
29m 0s
Cancel
Cancel