Filter
Top Products
65
Features That Can Be Set Using the Multi Selector
Shooting Features
Using Macro Mode
When using macro mode, the camera can focus on objects as close as 10 cm (4 in.)
from the front of the lens.
This feature is useful when taking close-up pictures of flowers and other small
subjects.
1 Press the multi selector I (p macro mode).
2 Use the multi selector to select ON and press
the k button.
• The macro mode icon (F) is displayed.
• If a setting is not applied by pressing the k button
within a few seconds, the selection will be canceled.
3 Use the zoom control to set the zoom ratio to
a position where F and the zoom indicator
glow green.
• How close you can be to the subject when shooting depends on the zoom ratio.
When the zoom ratio is set to a position where F and the zoom indicator glow green,
the camera can focus on subjects as close as 30 cm (1 ft) from the lens. When the
zoom is at the maximum wide-angle position, (at the position where G is displayed),
the camera can focus on subjects as close as 10 cm (4 in.) from the lens.
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C Autofocus
When using macro mode in the A (auto) mode, you can focus without pressing the shutter-release
button halfway by setting Autofocus mode (A40) in the shooting menu (A39) to Full-time AF.
When using other shooting modes, Full-time AF is turned on automatically when macro mode is
turned on (except when using the Pet portrait scene mode).
You may hear the sound of the camera focusing.
C The Macro Mode Setting
• Macro mode cannot be used when using certain shooting modes. See “Default Settings” (A67)
for more information.
• The macro mode setting applied in A (auto) mode is saved in the camera’s memory even after
the camera is turned off, and reapplied the next time A (auto) mode is selected.
Macro mode