Nikon COOLPIX S6300 Digital Camera User Manual


 
E84
The Setup Menu
Reference Section
Eye-Fi Upload
B Notes About Eye-Fi Cards
Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
Select Disable where wireless devices are prohibited.
Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi
functions.
The camera is not compatible with the endless memory function. When it is set on a computer,
disable the function. If the endless memory function is enabled, the number of pictures taken may
not be displayed correctly.
Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.
C Eye-Fi communication indicator
The communication status of the Eye-Fi card in the camera can be confirmed on the monitor (A6).
w: Eye-Fi upload is set to Disable.
x (lights): Eye-Fi upload enabled; waiting to begin upload.
x (flashes): Eye-Fi upload enabled; uploading data.
y: Eye-Fi upload enabled but no images available for upload.
z: An error occurred. The camera cannot control the Eye-Fi card.
C Supported Eye-Fi Cards
As of November 2011, the following Eye-Fi cards can be used. Be sure that the Eye-Fi card firmware
has been updated to the latest version.
Eye-Fi Connect X2 SDHC 4GB
Eye-Fi Mobile X2 SDHC 8GB
Eye-Fi Pro X2 SDHC 8GB
Press the d button M z tab M Eye-Fi upload
Option Description
b Enable
Upload images created by the camera to a preselected
destination.
c Disable
(default setting)
Images will not be uploaded.