Filter
Top Products
Troubleshooting
Technical Notes and Index
F10
Images are too bright
(overexposed).
Adjust exposure compensation. 66
Unexpected results when
flash set to V (auto with
red-eye reduction).
When taking pictures with
V
(auto with red-eye
reduction) or fill flash with slow sync and red-eye
reduction in
Night portrait
scene mode, In-Camera
Red Eye Fix may be applied to areas not affected by
red-eye in rare cases. Use any scene mode other than
Night portrait
, and change the flash mode to any
setting other than
V
(auto with red-eye reduction)
and try taking a picture again.
43, 62
Skin tones are not
softened.
• In some shooting conditions, facial skin tones
may not be softened.
• Use Skin softening in the playback menu for
images containing four or more faces.
54
79, E19
Saving images takes time.
It may take more time to save images in the
following situations.
• When the noise reduction function is in
operation, such as when shooting in a dark
environment.
• When the flash mode is set to V (auto with
red-eye reduction).
• When shooting in Night landscape, Night
portrait, or Backlighting (when HDR is set to
On) scene mode
• When the skin softening function is applied
while shooting.
• When using continuous shooting mode
–
63
43, 45, 47
42, 43, 56
39, E38
A ring-shaped belt or
rainbow-colored stripe
appears in the monitor or
images.
When shooting with backlighting or when a very
strong light source (such as sunlight) is in the
frame, a ring-shaped belt or rainbow-colored
stripe (ghosting) may occur. Change the position
of the light source, or frame the picture so that the
light source does not enter the frame and try
again.
–
Problem Cause/Solution A